DBailen
Member
I am using the following:
PLC - Panasonic FP-x
Touchscreen- HMI Kinco ET070
The touchscreen intermittently flashes "[5]Socket COMM Error" yet numerical inputs and displays communicate accurately back and forth between my PLC.
EXAMPLE: Entering a value in the touchscreen display is correctly revealed in the PLC simulation. Values set in DT registers on the PLC are correctly displayed on the touchscreen when read.
I am trying to add a simple toggle button to turn a relay on and off in the PLC, yet nothing appears to happen.
I have made a single rung with one relay and one output paired with a single button layout on the touchscreen pointed to the relay address with no toggle results.
I would typically assume an intermittent communication error would be a faulty wire, but since numerical fields read and write correctly, I am stumped moving forward.
I am using "Kico HMIware 2.5" and "FPWIN GR 2.92"
Thanks for any assistance.
PLC - Panasonic FP-x
Touchscreen- HMI Kinco ET070
The touchscreen intermittently flashes "[5]Socket COMM Error" yet numerical inputs and displays communicate accurately back and forth between my PLC.
EXAMPLE: Entering a value in the touchscreen display is correctly revealed in the PLC simulation. Values set in DT registers on the PLC are correctly displayed on the touchscreen when read.
I am trying to add a simple toggle button to turn a relay on and off in the PLC, yet nothing appears to happen.
I have made a single rung with one relay and one output paired with a single button layout on the touchscreen pointed to the relay address with no toggle results.
I would typically assume an intermittent communication error would be a faulty wire, but since numerical fields read and write correctly, I am stumped moving forward.
I am using "Kico HMIware 2.5" and "FPWIN GR 2.92"
Thanks for any assistance.