Hi folks,
I'm working on a glass jar packing machine and trying to figure out how this STL code works. Most of the code is in ladder or FBD. But of course some of the code I'll have to alter is in STL.
Having stared at it for a while, has not really helped my understanding of it.
What I surmise is
"MP_Freig_GR_Aus" OR NOT "Anlagen".Pa.Anz.Auto OR "Anlagen".Pa.Anz.Auto_stoppt OR (#L_Imp_Freig_Prod AND Freig_Prod") must evaluate true to load 1.0
But where does the loaded value go? Normally into a tag, right?
What about the code below that, is that run as a separate part or part of the same code?
Must admit I have very little experience with STL, and even tough I do a little C++ for microprocessors and did some PHP back in the day. STL does not make much sense to me.
Thanks in advance for any help you could provide.
I'm working on a glass jar packing machine and trying to figure out how this STL code works. Most of the code is in ladder or FBD. But of course some of the code I'll have to alter is in STL.
Having stared at it for a while, has not really helped my understanding of it.
What I surmise is
"MP_Freig_GR_Aus" OR NOT "Anlagen".Pa.Anz.Auto OR "Anlagen".Pa.Anz.Auto_stoppt OR (#L_Imp_Freig_Prod AND Freig_Prod") must evaluate true to load 1.0
But where does the loaded value go? Normally into a tag, right?
What about the code below that, is that run as a separate part or part of the same code?
Must admit I have very little experience with STL, and even tough I do a little C++ for microprocessors and did some PHP back in the day. STL does not make much sense to me.
Thanks in advance for any help you could provide.