Was wondering if anyone had any suggestions:
I'm trying to connect to an old PanelView 1000 Touchscreen model# 2711-T10C16L1 via RS-232.
I'm using a 9300-USBS USB/serial converter with a 1747-CP3 cable to go to the port labeled "RS-232 DF1" on the PanelView.
I've gone to the setup menu in the PanelView to verify the comms parameters, which are the defaults.
In RSLinx, I've configured a RS-232 DF1 Device, (Verified correct com port) and selceted "SLC-CH0/Micro/PanelView" as the device type.
But in RSLinx, when browsing the DF1-DH-485 connection, the PanelView never appears, and thus I can't connect to it.
Is there something obvious I'm doing wrong? Thanks for any advice!
I'm trying to connect to an old PanelView 1000 Touchscreen model# 2711-T10C16L1 via RS-232.
I'm using a 9300-USBS USB/serial converter with a 1747-CP3 cable to go to the port labeled "RS-232 DF1" on the PanelView.
I've gone to the setup menu in the PanelView to verify the comms parameters, which are the defaults.
In RSLinx, I've configured a RS-232 DF1 Device, (Verified correct com port) and selceted "SLC-CH0/Micro/PanelView" as the device type.
But in RSLinx, when browsing the DF1-DH-485 connection, the PanelView never appears, and thus I can't connect to it.
Is there something obvious I'm doing wrong? Thanks for any advice!