TrySim read data from PLCSim

subshark

Member
S
Join Date
Jan 2015
Location
OAE
Posts
3
Hello!
How read/write data from S7-PLCSim in TrySim programm?
Program have Macro interface S7 via MPI/TCP-IP, but how configure it, no manual for it.
 

Similar Topics

S
TRYSIM simulation software
Hello, i am trying to simulate a power system using the components in TRYSIM software. I wanted to generate demand and relate it to frequency such...
Replies
0
Views
2,684
ssembo
S
Danny Van den Heuvel
PLCSIM 5.4 <> TrySim
Hi everyone,:lolis: I've got a problem reading / writing in- and outputs with PLCSIM and TrySim Everything works fine with local IO and...
Replies
0
Views
2,836
Danny Van den Heuvel
Danny Van den Heuvel
R
How to read/write changes to an existing AB FTView SE program
Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
131
Operaghost
Operaghost
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
211
Steve Bailey
Steve Bailey
A
Logix 5000 FAL Read Every Other Member
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
Replies
5
Views
152
AMarks95
A
Back
Top Bottom