Hey guys;
Im in between projects at the moment and I decided to mess around with Unity Pro XL as it will be the next PLC used on my next project. Years ago I messed around with shift registers and FIFOs on RS5 RS500 and a little bit with RS5000.
I was able to get them working with no trouble at all but this Unity has got me stumped. There seems to be so many blocks that can be used and I have not been able to get them to work at all. There is SHL SHR ROL and all the rest of that fun stuff. I have searched most of the day on this site and I understand the concept and even the examples I just can't seem to roll this knowledge into Unity.
The concept shown in this thread is all I really want to acheive. http://www.plcs.net/chapters/shift20.htm I don't want logic just an idea of which function to use that would lead me in the right direction.
Thank you in advance.
Im in between projects at the moment and I decided to mess around with Unity Pro XL as it will be the next PLC used on my next project. Years ago I messed around with shift registers and FIFOs on RS5 RS500 and a little bit with RS5000.
I was able to get them working with no trouble at all but this Unity has got me stumped. There seems to be so many blocks that can be used and I have not been able to get them to work at all. There is SHL SHR ROL and all the rest of that fun stuff. I have searched most of the day on this site and I understand the concept and even the examples I just can't seem to roll this knowledge into Unity.
The concept shown in this thread is all I really want to acheive. http://www.plcs.net/chapters/shift20.htm I don't want logic just an idea of which function to use that would lead me in the right direction.
Thank you in advance.