I have to write to a HMI, PV+1000, from a SLC504.
The terminal is a PV+1000 connected to the PLC via DH+.
Can someone tell me what software and how to connect to this device.
I am used to Logix 500, and Panelbuilder 32 etc, but not the newer terminals !!
Regards,
KK
The terminal is a PV+1000 connected to the PLC via DH+.
Can someone tell me what software and how to connect to this device.
I am used to Logix 500, and Panelbuilder 32 etc, but not the newer terminals !!
Regards,
KK