I work for a used industrial machinery merchant. We try to get uploads from all our machines for future customer support and security.
Can some kind soul explain how I get an upload from an NS12-TS01B-V2 using CX-Designer v3.73, please? I know the NS12's IP address is 192.168.1.6. I have no idea what the FINS source and destination addresses are (in the transfer settings dialog).
There are serial ports on the rear. What cable would I need if I went that route?
There are USB A & B connectors, too. Can I get an upload via those?
Can some kind soul explain how I get an upload from an NS12-TS01B-V2 using CX-Designer v3.73, please? I know the NS12's IP address is 192.168.1.6. I have no idea what the FINS source and destination addresses are (in the transfer settings dialog).
There are serial ports on the rear. What cable would I need if I went that route?
There are USB A & B connectors, too. Can I get an upload via those?