Baker in Virginia
Member
Good Morning ,
I have an application that I need to increase and decrease the FPM on conveyors . I have a HMI PB for increase and decrease. I have a total of about 12 belts , and about 30 recipes so I made the One Shots BOOL with an array of 30. Like M46_One_Shot_Increase_FPM_Recipe_(1) to M46_One_Shot_Increase_FPM_Recipe_(30).
The problem that I'm having is when the increase or decrease PB is pressed my FPM runs away from 50 to 600 + . I really don't see any obvious issue with it. I did a similar method on another machine I did last year and the method works great. I'm using a CompactLogix L33ER. Attached is a screenshot and some comments I have . I'm really shocked this is not working like I planned.
Any thoughts and advice would be great .
Thanks so much,
I have an application that I need to increase and decrease the FPM on conveyors . I have a HMI PB for increase and decrease. I have a total of about 12 belts , and about 30 recipes so I made the One Shots BOOL with an array of 30. Like M46_One_Shot_Increase_FPM_Recipe_(1) to M46_One_Shot_Increase_FPM_Recipe_(30).
The problem that I'm having is when the increase or decrease PB is pressed my FPM runs away from 50 to 600 + . I really don't see any obvious issue with it. I did a similar method on another machine I did last year and the method works great. I'm using a CompactLogix L33ER. Attached is a screenshot and some comments I have . I'm really shocked this is not working like I planned.
Any thoughts and advice would be great .
Thanks so much,