Using Active Directory in WinCC Pro V15

Hal9000

Member
H
Join Date
Jun 2010
Location
London
Posts
140
Hi there,

Does anyone have any knowledge/experience with using Active Directory with WinCC Pro V15?

Does V15 support AD?
 
Hal9000 said:
Hi there,

Does anyone have any knowledge/experience with using Active Directory with WinCC Pro V15?

Does V15 support AD?
Click to expand...

I think most Simatic products only interact with AD via an option called Simatic Logon.
 

Similar Topics

P
Kinetix 5500 Active homing - using PLC tag instead of hardwired inputs?
Hello PLCs.net! I have a kinetix 5500 drive connected to a gantry, I was wondering if there is a way to do active homing using a PLC tag? At this...
Replies
6
Views
3,107
Steve Bailey
Steve Bailey
U
firmware updating using RSLogix's Who Active
In RSLogix 5000, under Who Active, I can update Firmware for the CPU card and motion card. But I cannot do that for ethernet cards and I/O cards...
Replies
1
Views
1,354
nhatsen
N
C
Anyone Familiar With using Active Factory Reporting From Wonderware
:( I am having serious problems with my active factory reporting system that I recently purchased from wonderware. I cannot get it to run...
Replies
10
Views
9,969
almo
A
L
Sequence loop using EQU and MOV instructions
Hi, I wrote a sequence loop using EQU and MOV instructions and would like to validate that i'm doing this properly. i attached a picture of the...
Replies
13
Views
403
drbitboy
drbitboy
W
Reasons for using Tc2_NcFifoAxes?
Hi I'm very new to PLC programming and I'm trying to find out if this library (Tc2_NcFifoAxes) is necessary for our task In our case we need to...
Replies
0
Views
55
wopadidoo123
W
Back
Top Bottom