Hi,
Has anyone figured out how to access a PLC via a hostname in Kepware rather than it's IP address. You can do it in Linx but the Kepware ID field seems to only accept xxx.xxx.xxx.xxx IP address. This is no good because I have dynamic IP address for the PLC.
I'm trying in ControlLogix driver but a similar problem for modbus Ethernet as well.
Has anyone figured out how to access a PLC via a hostname in Kepware rather than it's IP address. You can do it in Linx but the Kepware ID field seems to only accept xxx.xxx.xxx.xxx IP address. This is no good because I have dynamic IP address for the PLC.
I'm trying in ControlLogix driver but a similar problem for modbus Ethernet as well.