Using Report Designer in Siemens WinCC......

MartAnd

Member
M
Join Date
Feb 2006
Location
Stockholm
Posts
7
I have spent some time trying to read a text-file into my report but without any good result...
Is there anyone who knows how to do this? It should be done so that when I launch my report (just by a button-click) a dynamic table should read in the contents of say any predifined .txt.

Would be happy if someone has encountered and solved the same or a similar problem.

Regards Mårten.
 

Similar Topics

A
how to create a report using FT ME
Hi guys is it possible to create a report from FactoryTalk ME about system status, alarm , just like SE? how about FT View CE, it is a PC based...
Replies
1
Views
1,846
JaxGTO
JaxGTO
A
Report Printing in Cimplicity 8.2 using Microsoft Excel 2007
Can anyone guide me how to print a point current value in an excel spread sheet using Cimplicity. I`ve read the cimplicity help but to no avail.
Replies
3
Views
3,956
mikewest
M
W
Reasons for using Tc2_NcFifoAxes?
Hi I'm very new to PLC programming and I'm trying to find out if this library (Tc2_NcFifoAxes) is necessary for our task In our case we need to...
Replies
0
Views
50
wopadidoo123
W
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
93
Alibaba07
A
T
Using Patch Panels in Control Panels
Adding ethernet equipment to an existing panel that has none. We have some solid ethernet cables coming from other remote cabinets that I plan to...
Replies
3
Views
151
nicherbert
N
Back
Top Bottom