Using Schneider OPC Factory Server with FTview SE Local Station

mehrdad

Member
M
Join Date
Nov 2013
Location
canada
Posts
18
Has anyone ever used Schneider's OPC Factory Server with Rockwell's FTview SE Local station before?
I'm using a Schneider 416NHM30042A Modbus Plus PCIe card to read data from old momentum PLCs. the only OPC server that supports this card is Schneider's OPC Factory Server.
now i was wondering if Schneider's OPC Factory Server is compatible with Rockwell's FTview SE Local station?
Thanks
 

Similar Topics

P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
109
Para
P
P
Control Schneider LXM 32 Via S7 300 using Profibus DP
Hello guys, I am trying to control a LXM 32 Drive using a S7 300 CPU with Profibus DP. I have configured everything according to the "STEP 7...
Replies
3
Views
859
psycho1o1
P
H
Schneider (Modicon) Arrays using structures as data types
Somewhat new to Schneider (aka Modicon) PLC's and the Unity Pro XL programming software. I have a TSX P57 6634M PLC. I would like to take an...
Replies
3
Views
3,188
HalfManHalfBiscuit
H
J
CitectSCADA/InTouch to Siemens S7/Schneider PLC Using Tag Based Addressing
Greeting, I am doing some investigations on which driver(s) support tag based addressing (eg. Pump001_Running) rather than DB or Modbus based...
Replies
4
Views
3,745
Thomas_v2
T
A
Schneider M340 With NOR0200 For telemetry using DNP3 and IEC 104 Protocol
I have 3 year experience in Schneider System,But i dont have any experience in RTU systems.For my new project we are using Schneider M340 with...
Replies
0
Views
3,585
arun_K
A
Back
Top Bottom