Hi all,
I have a ABB ACS 550 VFD, and I'm reading current from the first analog output (AO1).
The range I'm using is 0 to 66 amp, 4 mA to 20 mA.
The issue is that I'm reading around 1.7 amp when the motor is stopped, when it should be 0 Amps.
Any thoughts?
I have a ABB ACS 550 VFD, and I'm reading current from the first analog output (AO1).
The range I'm using is 0 to 66 amp, 4 mA to 20 mA.
The issue is that I'm reading around 1.7 amp when the motor is stopped, when it should be 0 Amps.
Any thoughts?