Wecon hmi modbus addressing

RockyNivas

Member
R
Join Date
Mar 2019
Location
United Kingdom
Posts
57
Hi All,

I would like to know is there any option in Wecon pi studio for Modbus addressing. I have gone through the options but I can't find the option to provide the Modbus address. Please guide and let me know.

(I am using OMRON PLC with Wecon HMI. I need to make the communication using Modbus TCP)

Thanks in advance.
 

Similar Topics

H
Configuring m221 and wecon HMI modbus RTU
disclaimer- 1,no one in their right mind would pick this configuration but I want to try and get it working. 2, my MB knowledge is sketchy at...
Replies
5
Views
1,186
jschulze
J
L
Wecon PI3070ig + Micro820
Hi All I have a couple of Wecon PI3070IG HMI's to evaluate. They are incredably affordable, so was looking at using for basic pump station /...
Replies
0
Views
354
Lemming
L
B
Simulate Siemens HMI to PLC through NAT connection
Hello, I have an issue where I want to simulate an Siemens HMI panel, through NAT connection to a PLC. I have the possibility through extended...
Replies
2
Views
89
mk42
M
D
HMI connected but no changes
Hi there, I'm trying to learn about the siemens TIA HMI features and have been following tutorials on a simple start/stop button test, however I...
Replies
3
Views
99
JesperMP
JesperMP
V
Shihlin HMI
hi there, I'm a beginner pls help when transferring pc to hmi there's an error message on shihlin hmi written com1 station 1: communication...
Replies
1
Views
94
DarrylR
D
Back
Top Bottom