russrmartin
Member
My application goes something like this. Standalone PLC5 with a PV+700 terminal as an operator interface. The PV+ is connected to ethernet. On a computer in the area, I am setting up a process SCADA node computer running iFIX 3.5. I have RSLinx Gateway installed on the SCADA computer. When I created my OPC topic, I can communicate with the PV+, but it is an unrecognized device. Does anyone exactly know what I need to do to make this device recognizable. When I developed the PV+ application, I used RSLinx for RSView that was already installed on a laptop. I have looked around for some version of this, but found nothing. Thanks in advance.
Russ
Russ