Clay B.
Lifetime Supporting Member
Hey guys,
This is probably a simple question (should be anyway). I need to configure some buttons on my Siemens touchscreen. I need them to be momentary and I want them to change states based on the state of a bit. THe part I am fuzzy on is how do you tie a bit tag to the button action.
Example:
When Push Button 1 is pressed B_Gate_Opn_en(m1.0) is on. When released then B_Gate_Opn_en(m1.0) is off. If B_Gate_Opn_End is on then Push Button color changes.
This is probably a simple question (should be anyway). I need to configure some buttons on my Siemens touchscreen. I need them to be momentary and I want them to change states based on the state of a bit. THe part I am fuzzy on is how do you tie a bit tag to the button action.
Example:
When Push Button 1 is pressed B_Gate_Opn_en(m1.0) is on. When released then B_Gate_Opn_en(m1.0) is off. If B_Gate_Opn_End is on then Push Button color changes.