Hi,
I am using Simatic MP277.I am looking for a method to acknowledge all the active alarms on HMI when the push button pressed in the field.i.e. When the pushbutton is pressed in the field,Digital sigal will come in to PLC. If this signal is active in the PLC then it should acknowledge all active alarms on HMI.
There is individual PLC acknowledge bit for the each alarms in the WinccFlex and I could not find a way to set all these PLC acknowledge bit from a singal bit in a PLC(PLC pushbutton).
I appreciate all the help.
Thanks
JNS
I am using Simatic MP277.I am looking for a method to acknowledge all the active alarms on HMI when the push button pressed in the field.i.e. When the pushbutton is pressed in the field,Digital sigal will come in to PLC. If this signal is active in the PLC then it should acknowledge all active alarms on HMI.
There is individual PLC acknowledge bit for the each alarms in the WinccFlex and I could not find a way to set all these PLC acknowledge bit from a singal bit in a PLC(PLC pushbutton).
I appreciate all the help.
Thanks
JNS