Wincc TIAV15.1 Annoying popup screen covering the main screen for every alarm

[qwemx]

I need to get rid of this please help

When an alarm happen on the HMI it leads to 3 screen popping up and covering all the screen display area.

these screens are Pending alarms, Unacknowledged alarm and Active system event



same thing when HMI is started

 

[JesperMP]

Go to the template screen.
Enable all layers.
Then you can see the message windows and do what you want to do to them.

 

[sigmadelta]

Well, you can tap the (X) in the upper right corner to close them immediately.

To get rid of the permanently, open the Template in your WinCC project, and delete or modify the popup capability of these alarm objects.

edit: Jesper, you're faster than me... but I had started to answer, but had to step away for a while.

 

[qwemx]

deleated the screeens from global screens and the problem was solved