sparkytex
Lifetime Supporting Member
Hello guys,
So I managed to make the equustek DLPCIe - DF1/DH+ card work with Win linx. I set up the 1770 KE driver with com 3 and DH+ 15 Oct (Which I assigned) and presto it worked and it was reading all the DH+ PLC's. However when I start up Wintelligent View and open up the secondary treatment HMI program and Press Runtime it fails to establish communications with Win Linx. I have Win Linx open with super who open, both the Ethernet and the DH+ drivers are working properly and showing so.
I took some snap shots of the error msg's im getting in Runtime, basically its saying its failing to communicate with any of the DH+ PLC's. I don't quite understand this seeing as how I can see right infront of me on Super who that they drivers are corking properly. Making a spare for this Winview HMI is turning into a nightmare. If anyone could help me get this up and running I'd be ecstatic as this is the last piece of the puzzle.
Photo 1 shows the Ethernet driver working correctly.
Photo 2 shows the 1770 KE driver working correctly.
Photo's 3 and 4 show the error msg's that pop up when I initiate runtime.
thanks, TEX
So I managed to make the equustek DLPCIe - DF1/DH+ card work with Win linx. I set up the 1770 KE driver with com 3 and DH+ 15 Oct (Which I assigned) and presto it worked and it was reading all the DH+ PLC's. However when I start up Wintelligent View and open up the secondary treatment HMI program and Press Runtime it fails to establish communications with Win Linx. I have Win Linx open with super who open, both the Ethernet and the DH+ drivers are working properly and showing so.
I took some snap shots of the error msg's im getting in Runtime, basically its saying its failing to communicate with any of the DH+ PLC's. I don't quite understand this seeing as how I can see right infront of me on Super who that they drivers are corking properly. Making a spare for this Winview HMI is turning into a nightmare. If anyone could help me get this up and running I'd be ecstatic as this is the last piece of the puzzle.
Photo 1 shows the Ethernet driver working correctly.
Photo 2 shows the 1770 KE driver working correctly.
Photo's 3 and 4 show the error msg's that pop up when I initiate runtime.
thanks, TEX