milmat1
Member
I need to choose a cable for some prox switches located on an overhead festoon system. They will be standard 24VDC 3wire prox to a digital input at the PLC. The problem is the distance total is close to 200 feet.
What would you suggest using here, and is the distance really any problem considering the 24VDC and the wide range of both the sensor and the PLC input. Something on the order of 10-30vdc..
One senor is to detect rotation of a shaft and one will count teeth of a rack gear to determine position..
What would you suggest using here, and is the distance really any problem considering the 24VDC and the wide range of both the sensor and the PLC input. Something on the order of 10-30vdc..
One senor is to detect rotation of a shaft and one will count teeth of a rack gear to determine position..