red rocket
Member
As the title says I have a panelview 550 (2711-k5a8l1 rvnA frn 4.20)
Its a simple program monitoring tank level.
I am using a slc 5/04.
I have an omega ultrasonic sensor reading the tank level and have that set up and functioning. The analog input card is reading the 4-20 signal.
I used an SCP to scale my input from the sensor, used a word bit as my output and the using a MOV I'm moving the scaled output to N12:0 (the integer file I set for the panelview)
Everything in my ladder seems to be functioning but my indicator on my panelview
Its a simple program monitoring tank level.
I am using a slc 5/04.
I have an omega ultrasonic sensor reading the tank level and have that set up and functioning. The analog input card is reading the 4-20 signal.
I used an SCP to scale my input from the sensor, used a word bit as my output and the using a MOV I'm moving the scaled output to N12:0 (the integer file I set for the panelview)
Everything in my ladder seems to be functioning but my indicator on my panelview