Hi I am nubie from jakarta, indonesia,
sorry for my english.
I work with S1200 PLC, and an analog input modul.
I select wrong input scale, a 0 - 20 mA in modul, connect to 4 -20 mA Temperature Transmitter.
Recently my channel modul is broken, the integer output value standstill at 4070 no matter the value of current (but when no signal from transmitter, the output integer is 0).
Can this wrong selective mode of 0 - 20 mA in module cause the broken channel in analog input modul?
Please someone help.
sorry for my english.
I work with S1200 PLC, and an analog input modul.
I select wrong input scale, a 0 - 20 mA in modul, connect to 4 -20 mA Temperature Transmitter.
Recently my channel modul is broken, the integer output value standstill at 4070 no matter the value of current (but when no signal from transmitter, the output integer is 0).
Can this wrong selective mode of 0 - 20 mA in module cause the broken channel in analog input modul?
Please someone help.