Hello friends,
I have Yaskawa A1000 drive and I want to activate a safety function during starting a drive .
I have assign frequency reference via AI1. Assume a case like we have started the drive and its running at 20Hz. We stopped the drive while the relevant potentiometer at the 20Hz position and if we again hit the start button the drive will reach to 20Hz.
In my specific application this will cause a safety issue and I want to prohibited my drive starting unless we reduce the potentiometer to the zero position. (I want to start the drive always from zero to required rpm using the potentiometer)
I have activated the same kind of safety function with Control technique mentor DC drives and I want to do the same for Yaskawa AC drive.:nodi:
Any help??
I have Yaskawa A1000 drive and I want to activate a safety function during starting a drive .
I have assign frequency reference via AI1. Assume a case like we have started the drive and its running at 20Hz. We stopped the drive while the relevant potentiometer at the 20Hz position and if we again hit the start button the drive will reach to 20Hz.
In my specific application this will cause a safety issue and I want to prohibited my drive starting unless we reduce the potentiometer to the zero position. (I want to start the drive always from zero to required rpm using the potentiometer)
I have activated the same kind of safety function with Control technique mentor DC drives and I want to do the same for Yaskawa AC drive.:nodi:
Any help??