klm
Member
This is a simple program, but
since I'm always trying to improve; I thought I would ask here.
I want to know if there is a better way of programming
"LAD 4". Maybe a different way that you may use.
Scope: The Bottle line "kicks off" bad bottles
as the line progress's. The light-tree can be seen
from the other side of the production floor.
The color "Amber" would tell the operator
the line has stopped (BSR has stopped) when
illuminated.
Starting with "LAD 4" rung "0"
1. I use S:42/0(simulation) to to trigger the BSR.
2. B3:0/7 was there to prevent BSR from working
whenever I wanted to disable BSR.
3. I wanted T4:0 to time-out and turn ON
"Amber (colored) light if BSR is disabled for more
than 5 seconds.
Thank you for your help/comments.
I've attached a pdf file to this post containing program
since I'm always trying to improve; I thought I would ask here.
I want to know if there is a better way of programming
"LAD 4". Maybe a different way that you may use.
Scope: The Bottle line "kicks off" bad bottles
as the line progress's. The light-tree can be seen
from the other side of the production floor.
The color "Amber" would tell the operator
the line has stopped (BSR has stopped) when
illuminated.
Starting with "LAD 4" rung "0"
1. I use S:42/0(simulation) to to trigger the BSR.
2. B3:0/7 was there to prevent BSR from working
whenever I wanted to disable BSR.
3. I wanted T4:0 to time-out and turn ON
"Amber (colored) light if BSR is disabled for more
than 5 seconds.
Thank you for your help/comments.
I've attached a pdf file to this post containing program
