allscott
Member
- Join Date
- Jul 2004
- Posts
- 1,332
This is a bit of an odd one but here goes anyway.
We have a machine that uses 24VDC flourescent fixtures to light up the inside of it while running. The fixtures contain two tubes about 16" long. The machine is a wire bobbin takeup and as such there is occasional wire flapping around inside the machine smashing against everything in site including this fixture.
The OEM fixtures are good heavy duty die cast units with very thick acrylic covers and have stood up quite well over the years but we have still managed to beat one into submission and I need a replacement.
The OEM replacement is $700.00 and is in Germany.
So can anyone recommend a supplier for a good heavy duty 24V DC floresent fixture that I can get in North America.
thanks.
edit: title says 24VAC should be DC, cant seem to change the title
We have a machine that uses 24VDC flourescent fixtures to light up the inside of it while running. The fixtures contain two tubes about 16" long. The machine is a wire bobbin takeup and as such there is occasional wire flapping around inside the machine smashing against everything in site including this fixture.
The OEM fixtures are good heavy duty die cast units with very thick acrylic covers and have stood up quite well over the years but we have still managed to beat one into submission and I need a replacement.
The OEM replacement is $700.00 and is in Germany.
So can anyone recommend a supplier for a good heavy duty 24V DC floresent fixture that I can get in North America.
thanks.
edit: title says 24VAC should be DC, cant seem to change the title
Last edited: