I'm playing around with the open source ethernet drive and a ML1100. For some reason, I can't get the ML1100 to accept the connection when I put the ML1100's ip address into the field and press open port. I get the message that the ML1100 refused the conenction at the IP address:2222 (I'm assuming 2222 is the port). Is there some additional setup needed in the ML1100? I know the driver is mainly for slc5.05, but I was thinking that the communication would be similar for the ML1100.
BTW, I've used the open source DF1 driver that Archie has worked on and I have to say Great Work Archie! The communication I was looking for has worked flawlessly.
Jr.
BTW, I've used the open source DF1 driver that Archie has worked on and I have to say Great Work Archie! The communication I was looking for has worked flawlessly.
Jr.