OkiePC
Lifetime Supporting Member
Today, our RA distributor and a Rockwell engineer came in to discuss our issues with the PV300 micro and the failure analysis (I think we asked for that about 5 months ago.).
Ours were failiing due to corrosion. We went out to look at the installation and low and behold, the PV300 Micro that was installed Sunday had already failed. I went ahead and replaced it with the Kadet while the Rockwell guys were here, and let them take the failed one with them.
Of course they wanted to talk about selling us a different unit to try to keep our business. I told them I was not interested in the PV Component, and that the PV+ Compact might be worth consideration if they have one that boots in 7 seconds and cost less than $335.
Anyway, I am very pleased with how the application turned out, but I have one more question about the alarming.
I have a couple dozen bit tags that trigger alarms, and the alarm ticker works nicely. I added an alarm list screen to view active alarms, and it lets me "Accept" (acknowledge) the alarms and then they disappear from the list and the ticker.
I still have a solid red alarm LED on the bezel, though, which mean accepted alarms still exist, so I need to know how to make that go away.
Paul
Ours were failiing due to corrosion. We went out to look at the installation and low and behold, the PV300 Micro that was installed Sunday had already failed. I went ahead and replaced it with the Kadet while the Rockwell guys were here, and let them take the failed one with them.
Of course they wanted to talk about selling us a different unit to try to keep our business. I told them I was not interested in the PV Component, and that the PV+ Compact might be worth consideration if they have one that boots in 7 seconds and cost less than $335.
Anyway, I am very pleased with how the application turned out, but I have one more question about the alarming.
I have a couple dozen bit tags that trigger alarms, and the alarm ticker works nicely. I added an alarm list screen to view active alarms, and it lets me "Accept" (acknowledge) the alarms and then they disappear from the list and the ticker.
I still have a solid red alarm LED on the bezel, though, which mean accepted alarms still exist, so I need to know how to make that go away.
Paul