We have a Proficy ME 6.0 application running on a GE QuickPanel View HMI. The panel is communicating with a Micrologix 1200 via a 1761-NET-ENI Ethernet Interface.
The Proficy application only allows creating integer variables of type DINT (32-bit). INT (16-bit) does not show up in the list of available variable types. If I create a variable to access N7:0 writing to that register writes to N7:0 and N7:1. Is there any way to define a 16-bit INT in Proficy ME or at lease have it limit the writing of the register to 16-bits.
Thanks.
The Proficy application only allows creating integer variables of type DINT (32-bit). INT (16-bit) does not show up in the list of available variable types. If I create a variable to access N7:0 writing to that register writes to N7:0 and N7:1. Is there any way to define a 16-bit INT in Proficy ME or at lease have it limit the writing of the register to 16-bits.
Thanks.