Hi all,
I have a client with a large collection of PLC-5 (yes 5) with DH+ connections. They have a number of laptops that 'float' and three configuration stations that fixed and connected to the mill ethernet network.
Of course what happens is that programming documentation is too often lost (and perhaps more I suspect, if download is used too casually).
My essential choices are to enforce a SOP (Standard Operating Procedure) or to go to some asset management software (like FactoryTalk Asset Center).
My question is about perferred best practices. What is your opinion?
I have a client with a large collection of PLC-5 (yes 5) with DH+ connections. They have a number of laptops that 'float' and three configuration stations that fixed and connected to the mill ethernet network.
Of course what happens is that programming documentation is too often lost (and perhaps more I suspect, if download is used too casually).
My essential choices are to enforce a SOP (Standard Operating Procedure) or to go to some asset management software (like FactoryTalk Asset Center).
My question is about perferred best practices. What is your opinion?