nightline
Member
Gents,
I had to update the 1756-M08SE because of a CPU update to V19.
Since than my servo-motors of the Kinetix 6000 system make a lot of noise at the hookup test, tuning and when the axis is on by a Motion Direct Command.
The motor has a very weak power.
I think the firmware of the drives need to be updated also.
If I go to the firmware page on the AB web site and download the latest firmware for an A series Kinetix 6000 which is 1.134, I got a complete Control Flash installation which seems to install all the right firmware.
When I launch Control Flash I can find the catalog number of the drive ( 2094-BC02M02 for example ). I can point Control Flash in RSLinx to the drive, but Control Flash doesn't show any firmware for this drive.
I even can.t find it in the Control Flash folder.
Can anyone help me with this?
Thanks in advance!!!
Jack
I had to update the 1756-M08SE because of a CPU update to V19.
Since than my servo-motors of the Kinetix 6000 system make a lot of noise at the hookup test, tuning and when the axis is on by a Motion Direct Command.
The motor has a very weak power.
I think the firmware of the drives need to be updated also.
If I go to the firmware page on the AB web site and download the latest firmware for an A series Kinetix 6000 which is 1.134, I got a complete Control Flash installation which seems to install all the right firmware.
When I launch Control Flash I can find the catalog number of the drive ( 2094-BC02M02 for example ). I can point Control Flash in RSLinx to the drive, but Control Flash doesn't show any firmware for this drive.
I even can.t find it in the Control Flash folder.
Can anyone help me with this?
Thanks in advance!!!
Jack