I have a project that was handed off to me yesterday and I need the logic and HMI window built by Monday morning! I have a few questions to make sure I'm on the right track before I get started.
What is need on the HMI -
Input for total amount of gallons to dose ____ Gal
Input for total time frame to dose ____ Hrs
Input for time increments to dose ____ Mins
For an example, 25 gallons in a 20 hour time frame and dose in 30 min increments.
Total gallons/(total time/time increments) = gallons to dose @ each increment correct?
I would just need a TON instruction to restart after each increment to restart the process until the total gallons are accumulated?
Thanks.
What is need on the HMI -
Input for total amount of gallons to dose ____ Gal
Input for total time frame to dose ____ Hrs
Input for time increments to dose ____ Mins
For an example, 25 gallons in a 20 hour time frame and dose in 30 min increments.
Total gallons/(total time/time increments) = gallons to dose @ each increment correct?
I would just need a TON instruction to restart after each increment to restart the process until the total gallons are accumulated?
Thanks.