I'm trying to download/ go-online a micrologix 1400. Software in use:
Win 10 64 bit host machine
Win 7 SP1 32 VM machine
RSLogix 500 v9
RSLinx classic v4.11
I've configured the ethernet devices driver and pointed it to the PLC. The PLC appears briefly, then gets a red cross through it. Then it re-appears and the cycle continues.
Things I've tried:
1. make sure can ping PLC - obviously
2. deleted harmony files in rslogix
3. updated EDS from Rockwell.
Things I should mention:
this is a series C plc v21.
The original programmer downloaded a series B rslogix 500 project (v9).
I've checked the port 44818 is open - which it is.
I'm going around in circles without making much progress. Any help - much appreciated!!!
Thanks
Rob
Win 10 64 bit host machine
Win 7 SP1 32 VM machine
RSLogix 500 v9
RSLinx classic v4.11
I've configured the ethernet devices driver and pointed it to the PLC. The PLC appears briefly, then gets a red cross through it. Then it re-appears and the cycle continues.
Things I've tried:
1. make sure can ping PLC - obviously
2. deleted harmony files in rslogix
3. updated EDS from Rockwell.
Things I should mention:
this is a series C plc v21.
The original programmer downloaded a series B rslogix 500 project (v9).
I've checked the port 44818 is open - which it is.
I'm going around in circles without making much progress. Any help - much appreciated!!!
Thanks
Rob