Hi.We used S7-300 Cpu and MM440 inverter on profibus comm(Step-7 V5.5).Nowadays we want to use G120C DP Sinamics inverter instead of MM440.I looked for on net simple example but result is not good.Sinamics G120C DP version C02/V4.7.I would be grateful if that assistance.Thanks in advance...
s7-300 and G120 Sinamics
- Thread starter tulip
- Start date
Similar Topics
Hey all, first time poster here.
I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400.
Keyence sent...
Hi Siemens guys!
I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Hello PLCS.Net Forum,
First time posting. Let's assume I am a novice.
BASIC PROBLEM:
My servo/linear piston is no longer zeroed to the...
hi...
i have an issue in s7 300 plc, while we run the machine(in idle there is no fault) , plc cpu goes in SF mode, after restart the power cycle...