sync malegis clock to m340 plc

ganutenator

Lifetime Supporting Member
ganutenator
Join Date
May 2002
Location
kansas
Posts
1,440
I'm out of time.
I needed to have this done already.
project going live on Sunday.
Anyone already do this?

magelis hmi. won't let me edit subject
 
 

Similar Topics

C
How to Time Sync? S7-400H CPU (Time Master) With Wincc Runtime V7.5(Time Slaves)
hello s7-400h and wincc are connected to each other via Ethernet. I need help on how to do time synchronization
Replies
0
Views
77
Controller5848
C
B
Studio 5000 - Time Sync Grandmaster Priority - Control Sync and Module Connection Faults
I have to start out by saying I am not a PLC programmer and I have basic programming skills but mainly use software as a troubleshooting tool. I...
Replies
0
Views
151
Bobcat22
B
A
Different Drivers and motors motion sync in Rockwell Studio 5000
Hi currently my existing PLC using AB motor & driver to spin production, however customer want to another set, if this possible we use different...
Replies
1
Views
269
robertmee
R
B
AOI to sync slave controller clock to master controller clock messaging question
Hello, I am trying to create an AOI that will retrive the clock datetime bits from a master plc through a generic message read instruction and...
Replies
2
Views
522
Contr_Conn
Contr_Conn
M
Time Sync problem (Rockwell Automation)
I have a problem with time sync working in this topology. I have a plc with grandmaster clock controlling motion groups. I wanted to add kinetix...
Replies
7
Views
1,105
muusic_man
M
Back
Top Bottom