Vijeo XD doubt

erghurt

Member
E
Join Date
Aug 2017
Location
Alton
Posts
14
Hi there

I have an HMISTO735 and I want to connect it to an Allen Bradley Micro820, and I'm wondering if Vijeo XD is able to communicate between both of the devices.

Because despite that the Micro800 series are not featured in the Supported Devices from the Maker List under Rockwell Automation, you can in fact add a device name "EtherNet/IP" in Vijeo XD under the Rockwell Automation devices Library.

If it is possible, how can I do it? I am unable to see the Symbol list (I think that Micro800 series do not store them under *.L5K files)
 

Similar Topics

R
vijeo citect scada
Hello, the system we use is Scada 7.5 series. We have usb key activ now we need additional key to make the system work, how do we solve this...
Replies
0
Views
90
Rashka
R
M
Vijeo designer 6.2
Good Day all. I am currently busy with a schneider HMI design in vijeo designer and i want to know how you can animate an image to move on the x...
Replies
2
Views
221
mr.qrsa
M
A
Vijeo Designer Acknowledge Alarms
Hello, I have been tasked with adding some analog signals for display and alarm setup in some old Schneider Electric HMIGTO HMI-panels. I have...
Replies
4
Views
226
ahorsenamedhorse
A
A
Function for data enter and out Vijeo Citect 7.4
My system are taking data from RHT sensors, around 45 points. Now I want to make a function in which, if the data is #BAD or 0 in values for all...
Replies
0
Views
495
Aimin Ariff
A
A
Urgent need of help in Vijeo Citect 7.4
I have DI module ICPCon M7024UD connect to my pc using COM3 MODBUS RTU and also RHT sensors are using MODBUS TCPIP.. The problem is, it cannot...
Replies
9
Views
1,709
Aimin Ariff
A
Back
Top Bottom