high speed counter and pulse output
- Thread starter guruge
- Start date
bernie_carlton
Lifetime Supporting Member + Moderator
1. The "R" (Relay output) doesn't have Pulse Output. Only DC output units have this.
2. Even if it did you can't use both at the same time. Sorry, no cheap closed loop position controller.
2. Even if it did you can't use both at the same time. Sorry, no cheap closed loop position controller.
Similar Topics
Hello Folks,
Has anyone configured a Momentum high speed counter on Unity 13.1.
We need the wiring diagram for Momentum High speed counter and...
i am bench testing a 1734 -VHSC24 Point I/O High Speed counter module,
i cannot find any examples of wiring the outputs from the module.
does...
Hello guys,
I have created a program where I count the high speed inputs of a flowmeter and create pulses per second to check the flowrate. Next I...
Hello to all,
I don't have to much experience in the PLC. I'm using the Studio 5000 v32.03
We are trying to measure the length of a product, in...
Does anyone know how to set the output window on-off values on the fly without having to inhibit the module? I could of sworn when I first started...
