Help needed

Alan Case

Lifetime Supporting Member
Join Date
Apr 2002
Location
Wagga Wagga
Posts
1,268
Hi, Would someone in the States be kind enough to post to me some 5mm ball end Allen keys to fit a quarter inch electric screw driver.
I can order them from Wiha tools with a card over the internet (they seem to be the only company making them)but can only get them delivered to a USA address. If I send you the postage costs and some extra for you time to put them in an envelope and drop them in the mail it would be most appreciated.
If someone can do this please PM me.
Thanks Alan Case
 

Similar Topics

I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
254
Hi I’m after some help , I have a plc program with a baumer verisens vision camera attached I have got the signals working ect but I have an...
Replies
9
Views
973
Hi all, We are facing synching issues with redundancy module, where the Primary is ending up with disqualified secondary. Normally this would...
Replies
2
Views
638
Hi all, I have got this machine that needs to be up and running soon. This machine has Schneider's Controller and I/O modules, 3 vfd's, 2...
Replies
2
Views
923
Is it possible to write to the high speed counter function file "high speed preset" on an AB micro 1100. I have the HSC set up with a MOV...
Replies
3
Views
1,097
Back
Top Bottom