glenncovington
Lifetime Supporting Member
I have a Dell Optiplex260 with Windows 2000 on it. The PC asks as an operator interace to a Siemens CP342-5 using a CP5613 card in the PC to communicate. It appears the CP5613 died, and Siemens does not make the CP5613 card anymore, they have the CP5613A2 card. This is to deal with new PCI bus specs. The new card requires new Simantic NET software.
I have been having a real hard time getting the Simantic Net to update, but finally have device manager in windows showing the new CP5613A2 card in place and happy.
At this point to get the Wonderware application working again I think I need to update the configuration file in Step7. The problem is in Step7 the CP5613A2 card does not show up in the catalog of available hardware. How do I get the catalog to be updated with the A2 card.
I have been having a real hard time getting the Simantic Net to update, but finally have device manager in windows showing the new CP5613A2 card in place and happy.
At this point to get the Wonderware application working again I think I need to update the configuration file in Step7. The problem is in Step7 the CP5613A2 card does not show up in the catalog of available hardware. How do I get the catalog to be updated with the A2 card.