Hi All
I am trying to change the Serial port configuration from System to USER mode through couple of CIP messges on Compact logix L35E processor. But i am getting some error. Here is the CIP messages order and structure:
MSG_1
Msg Type: CIP generic
Msg Service: Set Attriute Single
Service Code: 10
Class : 0x6F
Instance: 1
Attribute: 106 (0x6A)
Souorce Element: Mod_tag (user defined tag, containing value 0xA3)
Source Length: 1
Under Communication Tab:
Path: 1,0
On this message i am getting an error "Undefined or unsupported attribute, error code : 0014"
MSG_2
Msg Type: CIP generic
Msg Service: Apply Attribute
Service Code: 0x0D
Class : 0x6F
Instance: 1
Attribute: 0
Under Communication Tab:
Path: 1,0
does any body know why i am getting this error, i have tried putting both 106 or its hex equivalent 6A, but same problem. Also will this thing work in order to change the Serial port mode from System to User? or do i have to do something else? Thanks in advance
I am trying to change the Serial port configuration from System to USER mode through couple of CIP messges on Compact logix L35E processor. But i am getting some error. Here is the CIP messages order and structure:
MSG_1
Msg Type: CIP generic
Msg Service: Set Attriute Single
Service Code: 10
Class : 0x6F
Instance: 1
Attribute: 106 (0x6A)
Souorce Element: Mod_tag (user defined tag, containing value 0xA3)
Source Length: 1
Under Communication Tab:
Path: 1,0
On this message i am getting an error "Undefined or unsupported attribute, error code : 0014"
MSG_2
Msg Type: CIP generic
Msg Service: Apply Attribute
Service Code: 0x0D
Class : 0x6F
Instance: 1
Attribute: 0
Under Communication Tab:
Path: 1,0
does any body know why i am getting this error, i have tried putting both 106 or its hex equivalent 6A, but same problem. Also will this thing work in order to change the Serial port mode from System to User? or do i have to do something else? Thanks in advance