Upgrading Step7 with SP1, SP2 and SP3

[laura]

Hello there.

I am new here, but I have got amazingly good help here on another topic, so I will try again.

I was suggested to download free the Service Packs 1, 2 and 3 at this address: http://support.automation.siemens.com/GB/llisapi.dll?func=cslib.cssearch&siteid=csius&lang=en&aktprim=100&content=skm%2Fmain%2Easp%3FSearchArea%3Dhb%26HitPo s%3D0%26DefOpt%3Dfalse%26Cookie%3Dfalse%26u%3D%26D ateFrom%3D%26DateTo%3D%26F1Preview%3Dtrue%26F3Prod Support%3Dtrue%26F31hb%3Dtrue%26BranchID%3D%26Bran ch%3D%2D%26query%3D%26HitsPerSite%3D10%26objaction %3Dcssearch%26showoptions%3Dfalse%26firstload%3Dno (http://support.automation.siemens.com/GB/llisapi.dll?func=cslib.cssearch&siteid=csius&lang=en&aktprim=100&content=skm%2Fmain%2Easp%3FSearchArea%3Dhb%26HitPo s%3D0%26DefOpt%3Dfalse%26Cookie%3Dfalse%26u%3D%26D ateFrom%3D%26DateTo%3D%26F1Preview%3Dtrue%26F3Prod Support%3Dtrue%26F31hb%3Dtrue%26BranchID%3D%26Bran ch%3D%2D%26query%3D%26HitsPerSite%3D10%26objaction %3Dcssearch%26showoptions%3Dfalse%26firstload%3Dno )


Somehow I can only find SP1, and not SP2 and SP3.

Does anyone know where to find them ?

I need them for my Hardware Config......my current version is missing the cpu I have ordered.

laura

[PeterW]

I did a search for STEP 7 V5.2 and it came up with SP1 and hotfix 3


http://support.automation.siemens.com/WW/llisapi.dll?csquery0=STEP+7+V5.2&aktprim=0&extranet=standard&func=cslib.csinfo&lang=en&nodeid0=10805384&objaction=csbrowse&objid=10805384&siteid=cseus&subtype=133100

Try this as well, I think its the cpu file your looking for

http://support.automation.siemens.com/WW/llisapi.dll?query=GSD&func=cslib.cssearch&content=skm%2Fmain.asp&lang=en&siteid=cseus&objaction=cssearch&searchinprim=0&nodeid0=4000024&x=30&y=11

[PeterW]

that secod one is wrong, it show the previous search I had done??


try this

http://support.automation.siemens.com/WW/llisapi.dll?query=CPU+314C-2+PTP&func=cslib.cssearch&content=skm%2Fmain.asp&lang=en&siteid=cseus&objaction=cssearch&searchinprim=0&nodeid0=4000024&x=39&y=5

take the first option:

The downloads are at close to the bottom, 5.2 SP1 is what theyt require.

[laura]

Thank You SO much again PeterW.

I downloaded the cpu, and it is now in my Hardware Configuration.