pls help
- Thread starter Egyaim
- Start date
Profibus?
How is this set up configured? Is it using Profibus via a 308 card to network them together? If so all you have to do is change the profibus config. Remove the OP7 and add the MP370. It shouold not be to hard. Let me know if I can help.
How is this set up configured? Is it using Profibus via a 308 card to network them together? If so all you have to do is change the profibus config. Remove the OP7 and add the MP370. It shouold not be to hard. Let me know if I can help.
Similar Topics
Hi im doing a energy saving program for a lamp. And basically the instructions are to turn off the lamp if is not being used ....... but with no...
[IMG]https://www.img.in.th/image
My timer cant run, please help me
Hi,
I am fairly new to PLC programming and in this project i have to understand the electrical circuit and implement the logic in PLC.
The only...
Trying to wrap my head around an Eberle PLS 511 program. I have a register 700 describes as EXOR/ZS/inc.dec counter. Looks like it's called up...
Hi,
I have added digital output expansion module(1762-ob32t) to the PLC and able to program the output but when i try to measure the voltage,i am...