PanelViewPlus600 to Channel zero of slc5/03 possible or not

prakashn

Member
P
Join Date
Jan 2004
Location
*******.
Posts
12
Panel view plus 600 (AB) with only rs232 ( 9pin D shell )can communicate with channel 0 ( RJ45 )of slc 5/03 if it is possible please give the details of converters and cables which we have to use?
 
You are right.

slc503.jpg
 

Similar Topics

R
4-Channel PWM Amplifier
Good morning! I'm trying to find a DIN rail-mountable 4-0channel PWM amplifier that is capable of accepting a 5VDC PWM with a maximum frequency...
Replies
2
Views
116
BryanG
B
A
Looking for a 4 or 8-channel converter for 4-20mA inputs and 0-135Ohm outputs
Problem: Our PLC can only output 4-20mA, but the actuators it needs to control, modulate based on a 0-135Ohm signal. Buying 4 or 8 individual...
Replies
7
Views
288
AdaptnOvercome
A
R
Interlock device - only two channel?
Hi, Had a discussion with a cunsultant about safety and he claimed that for example an Allen Bradley MC1 (two contacts) magnetical non-contact...
Replies
7
Views
1,019
rQx
R
D
Incorrect current conversion on channel (IF16H)
Good day. I encountered a problem when calibrating a channel on the IF16H module. The module is located in the local backplane along with the...
Replies
5
Views
755
parky
P
L
SLC 5/04 DH+ Channel 1 & DL3500 communication?
After I tried wiring, I used computer program communication to read the PLC N value, but received a NAK signal. And the DL3500 CHA light keeps...
Replies
0
Views
444
lkkplayer
L
Back
Top Bottom