Profisafe and safety plc

Werner

Member
Werner
Join Date
Apr 2005
Location
IJsselstein
Posts
336
Hi there!


Has anyone experience with emergency sensors on profibus? (ET200S with fail safe modules and S7-300F plc).

Good/bad?
Easy to use/complex nightmare?
 
Last edited:

Similar Topics

J
Profisafe on non-safety PLC?
Hello everybody, Does anybody knows if a conventional (non safety) siemens PLC, for example a S7-315 support the ProfiSafe protocol? I know it...
Replies
9
Views
4,419
JesperMP
JesperMP
D
problem with siemens profisafe safety module
Hi. I'm getting the following error on my PLC: "Faulty Module (diagnostic interrupt detected)" while online with the PLC, in the diagnostic...
Replies
12
Views
13,940
iant
iant
G
Profisafe F-host/safety controller options?
Does anybody know of low-cost alternatives to the Siemens F series of PLCs that can function as safety controllers on a profisafe network? I see...
Replies
1
Views
2,042
Timbert
Timbert
S
Profisafe between two S7-1200
Hello, I´m doing an exercise in safety and is using SENPDP and RCVDP to accomplish a safe connection between the two PLC:s. But I´m stuck at the...
Replies
2
Views
783
swedeleaner
S
O
PROFIsafe device on PROFINET network?
I am using an Emerson CPL410 cpu as a PROFINET master. I don't believe that this CPU supports PROFIsafe, as otherwise it would have been...
Replies
4
Views
2,709
Ozpeter
O
Back
Top Bottom