Simatic Op 25

dmardinly · Oct 7, 2006

I have a panel of op 25 , and need to get version of the software on it TO REPLACE IT , is there any way as no possability of upload the programme from it by PROTOOL.

Best Regards

David

Zimbo · Oct 7, 2006

You have to use the program "PROSAVE".

One can download the program at http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&csquery0=prosave&foldersopen0=-72-71-&nodeid0=10805045&lang=en&siteid=cseus&aktprim=99&extranet=standard&objid=10805045&DataKey=10805045&treeLang=en

dmardinly · Oct 8, 2006

Thanks Zimbo.

I have prosave but when uploading you can only download on same type panel I need to convert to OP270 Panel , and dont have the original programme wroted to this panel

Amr Hassan · Oct 8, 2006

u need a program called comtext

dmardinly · Oct 8, 2006

Amr Hassan said:
u need a program called comtext

Dear Amr.

Thank you very Much , would you like ti inform me where to get this programme.

Best Regards

rgua · Oct 8, 2006

COMTEXT uploads the configuration, but it only works with TD10, TD20, OP5, OP15, OP20, OP397.

It doesn't work with OP25.

lhughes39 · Oct 8, 2006

If you do not have the orginal program there is not much you can do. You may already know this, but you will have to redo the program for the new panel from scratch. Otherwise you will be stuck with using the OP25.

am_elmancy80 · Nov 27, 2006

plz send me how to connect an op25 used in s5-135
or cable code

Zimbo · Nov 28, 2006

Hi am_elmancy80.

one can download the manual here -> https://support.automation.siemens.com/WW/llisapi.dll?aktprim=99&lang=en&referer=%2fWW%2f&func=cslib.csinfo2&foldersopen0=-72-71-&nodeid0=4000024&siteid=cseus&extranet=standard

Simatic Op 25

dmardinly

Member

Zimbo

Member

dmardinly

Member

Amr Hassan

Member

dmardinly

Member

rgua

Lifetime Supporting Member

lhughes39

Member

am_elmancy80

Member

Zimbo

Member

Similar Topics