S7 to GE Cimplicity

Is there any automatic way to link the points and alarms in GE cimplicity and Siemens S7 program?

If you are refering to make the communication between the Cimplicity HMI to the PLC S7, then no. We had to use an OPC client to make the communication. We used Kapeware.
If there is not something new, there where no drivers for S7 in Cimplicity.

There are OPC Servers for Siemens PLC in the Proficy Machine Edition CD. When you install them, they appear in the CIMPLICITY HMI Protocols and you can read tags from Simatic.