ET200S (motorstarters ?)

userxyz

Member
U
Join Date
May 2002
Location
any
Posts
2,768
I need 8 inputs and I need to control 2 motors of 0,37kW...

We usally use et200s 16 di/do, and use outputs to start motors with contactors.


But, ET200S has Motorstarters, can it be done with that?

What do I need, what powermodules, et200s and motorstarter do i neeD ?
 
this good ?

eno.JPG


this works for motors that can run in 2 directions ?
 

Similar Topics

K
Siemens ET200S IM-151-8 PN/DP CPU to Rockwell Allen Bradley L73 Communication
I was trying to communicate between Siemens ET200S IM-151-8 PN/DP CPU to Rockwell Allen Bradley L73 through Hilscher Gateway NT100-RE-EN. Using...
Replies
0
Views
115
kingsman8385
K
C
ET200S 4F-DO config problem
Hi all It’s been a while since I did any safety config with an S7-300 PLC and I think I must be missing something , I’ve added a 4F-DO output...
Replies
7
Views
3,829
RVaughan
RVaughan
P
ET200S Profinet GSD file
PLC in the project that I am currently working on has following GSD file but I cant find it anywhere online. My PLC is ET200S and its CPU is...
Replies
7
Views
2,091
AlfredoQuintero
A
R
WinCC 7.5 ET200S SCADA Communications
Got a new project using WinCC SCADA (V7.5 SP2) - the PLC is an ET200-SP, I've never had to communicate with one of these before (done plenty of...
Replies
3
Views
2,428
rtgibson
R
A
s7-300 plc with et200s modules
i m working on an old machine that has a layout of 1 cpu 6es7 315-6tg10-0ab0 (bus adresss 2) 1 et200s 6es7 151-1aa04-0abo (bus adress 4) 1 et200s...
Replies
7
Views
3,205
JesperMP
JesperMP
Back
Top Bottom