ET200S Profinet GSD file

[psycho1o1]

PLC in the project that I am currently working on has following GSD file but I cant find it anywhere online. My PLC is ET200S and its CPU is IM151-8 PN/DP. Please note that I don't have access to original project files and currently working on a upload of the program. Can anyone point me in the direction where I can download this.

The GSD file "GSDML-V2.1-NDC-710-20101220.xml"
is missing.
IO system: "PROFINET-IO-System"
IO device: "mm710e01"

my order ID is 6ES7151-8AB01-0AB0.
Thank you

 

[AlfredoQuintero]

try installing the latest HSP, hardware support package which includes I think the GSDML files for the ET200

 

[psycho1o1]

I did installed HSP but it didn't work, Do you hav any other ideae?

 

[kalabdel]

Search for part of the file name and start down the rabbit hole.
The search, if accurate, indicates that you may have NDC 710 series gauge, whatever that is. If correct then you will need to search their site (good luck) or contact them for the file.

 

[psycho1o1]

I cant find any reference to "NDC 710 series gauge" in the internet whatsoever. I have been stuck on this problem for weeks. All the profinet GSDML files in the Siemens support doesnt have V2.1.

 

[kalabdel]

Does any of this ring a bell? What kind of machine is it?


Note: The word "this" in the above question is linked to a search result. Click on it.

 

[psycho1o1]

Thank you so much man. there is a gauge sensor in the machine. Manual says its name is 710 gauge. That is probably it. I have been looking for a profinet gsdml in Siemens forums this whole time. I will look in there site.
https://www.cornestech.co.jp/en/products/inspection/

This is a Chocolate prefiner by the way.
Thank you again.

 

[AlfredoQuintero]

https://ndc.custhelp.com/app/answers/detail/a_id/329/~/fieldbus-gateway-files-for-ndc-technologies-%28betalasermike%29-products


The above link seems to be a database of EDS, GSDML, GSD files for the fieldbus gateway of the NDC devices.