Rotary Switch

Greg Dake

Member
Join Date
Jun 2005
Location
Milwaukee, Wi
Posts
550
Greetings,

A little OT...I'm looking for a 22mm rotary switch, I need 10 positions. If not 22mm, the smallest package available. It doesn't need to be keyed, just 10 positions and as small as possible. The ones I've found thus far are quite large.

TIA,

Greg
 

Similar Topics

Hello to everyone. There is an inductive sensor to control the angle on the "Balluff bsw 819" rotary cam switch in a 1000 ton mechanical press...
Replies
0
Views
1,122
Hi, everyone: I got issue with creating a rotary switch in TIA Portal.after start simulation, this sw doesn't rotate at all. I follow one video...
Replies
13
Views
3,218
I am needing a rotary encoder switch. Preferably, it would have screw terminals for connections. I'm looking for it to have a digital pulse as...
Replies
7
Views
3,381
I am looking at replacing an old rotary stepper switch. This is an application where I could use a PLC, but other than the sequencing of the...
Replies
3
Views
1,756
We are looking for a rotary cam switch with either 12 or 16 positions where the outputs would be a binary counter indicating the position. Switch...
Replies
10
Views
4,206
Back
Top Bottom