maniec
Member
Can anyone tell me what the difference is between 1794-ACN and ACN15. I have been searching the internet and can not find any reference to 1794-ACN .
1794-acn
- Thread starter maniec
- Start date
mgvol
Member
1794-ACN's have not been available for a while now. Basically, they were the pre-ControlNet V1.5 modules. You will need either a 1794-ACN15 (single channel) or 1794-ACN15R (redundant channels).
Similar Topics
I read post on this Network adaptor.
They got rev. 1.25 and the whole plant is less than 10 years old.
What gives? They say they have a...
Hey Everyone,
After reading a lot on this forum and elsewhere I see not many are fond of the 1794-VHSC module. I can see to a degree as I was...
I'm sure this question has been posted a thousand times on here but for me it was even funnier when I got to ask Rockwell / AB directly. My...
Hello,
a customer i support has DH+ RIO racks all over the plant. they use 1794-asb modules. today they had a rack fault out and go unresponsive...
I have to configure new 1794-ADN Series C in my devicenet network. I have downloaded the EDS File and registered it. But while configuration in...
