hsc
- Thread starter juan
- Start date
Rick Densing
Member
You did not say what model you are using.
The AB slc HSC card can be hooked up in quadrature mode. Then it will count up and down depending on the direction of the pulses.
The AB slc HSC card can be hooked up in quadrature mode. Then it will count up and down depending on the direction of the pulses.
Similar Topics
Hello.
Has anyone ran into an issue with HSC on 2080-LC20. It run a cut off press and every so often after resetting to 0 it does not count...
Hey Everyone,
After reading a lot on this forum and elsewhere I see not many are fond of the 1794-VHSC module. I can see to a degree as I was...
Hi everyone,
this is my first time trying to setup encoder counts and track the traveled distance and speed i am using L27ERM QBFC1B processor...
Good day,
I have a micro 850 with a 2080-MOT-HSC that is being fed by two flowmeters, Schneider Electric using IMT31's as converters. They are...
I'm trying to set up a ring counter - one that transitions from 3599 to 0 (and 0 to 3599 in the reverse direction). My counter insists on...